terraform-provider-google/vendor/google.golang.org/grpc/resolver/dns/dns_resolver.go
Paddy 961c878e0d Switch to using Go modules. (#2679)
Switch to using Go modules.

This migrates our vendor.json to use Go 1.11's modules system, and
replaces the vendor folder with the output of go mod vendor.

The vendored code should remain basically the same; I believe some
tree shaking of packages and support scripts/licenses/READMEs/etc.
happened.

This also fixes Travis and our Makefile to no longer use govendor.
2018-12-20 17:22:22 -08:00

437 lines
12 KiB
Go

/*
*
* Copyright 2018 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
// Package dns implements a dns resolver to be installed as the default resolver
// in grpc.
package dns
import (
"context"
"encoding/json"
"errors"
"fmt"
"net"
"os"
"strconv"
"strings"
"sync"
"time"
"google.golang.org/grpc/grpclog"
"google.golang.org/grpc/internal/backoff"
"google.golang.org/grpc/internal/grpcrand"
"google.golang.org/grpc/resolver"
)
func init() {
resolver.Register(NewBuilder())
}
const (
defaultPort = "443"
defaultFreq = time.Minute * 30
defaultDNSSvrPort = "53"
golang = "GO"
// In DNS, service config is encoded in a TXT record via the mechanism
// described in RFC-1464 using the attribute name grpc_config.
txtAttribute = "grpc_config="
)
var (
errMissingAddr = errors.New("dns resolver: missing address")
// Addresses ending with a colon that is supposed to be the separator
// between host and port is not allowed. E.g. "::" is a valid address as
// it is an IPv6 address (host only) and "[::]:" is invalid as it ends with
// a colon as the host and port separator
errEndsWithColon = errors.New("dns resolver: missing port after port-separator colon")
)
var (
defaultResolver netResolver = net.DefaultResolver
)
var customAuthorityDialler = func(authority string) func(ctx context.Context, network, address string) (net.Conn, error) {
return func(ctx context.Context, network, address string) (net.Conn, error) {
var dialer net.Dialer
return dialer.DialContext(ctx, network, authority)
}
}
var customAuthorityResolver = func(authority string) (netResolver, error) {
host, port, err := parseTarget(authority, defaultDNSSvrPort)
if err != nil {
return nil, err
}
authorityWithPort := net.JoinHostPort(host, port)
return &net.Resolver{
PreferGo: true,
Dial: customAuthorityDialler(authorityWithPort),
}, nil
}
// NewBuilder creates a dnsBuilder which is used to factory DNS resolvers.
func NewBuilder() resolver.Builder {
return &dnsBuilder{minFreq: defaultFreq}
}
type dnsBuilder struct {
// minimum frequency of polling the DNS server.
minFreq time.Duration
}
// Build creates and starts a DNS resolver that watches the name resolution of the target.
func (b *dnsBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOption) (resolver.Resolver, error) {
host, port, err := parseTarget(target.Endpoint, defaultPort)
if err != nil {
return nil, err
}
// IP address.
if net.ParseIP(host) != nil {
host, _ = formatIP(host)
addr := []resolver.Address{{Addr: host + ":" + port}}
i := &ipResolver{
cc: cc,
ip: addr,
rn: make(chan struct{}, 1),
q: make(chan struct{}),
}
cc.NewAddress(addr)
go i.watcher()
return i, nil
}
// DNS address (non-IP).
ctx, cancel := context.WithCancel(context.Background())
d := &dnsResolver{
freq: b.minFreq,
backoff: backoff.Exponential{MaxDelay: b.minFreq},
host: host,
port: port,
ctx: ctx,
cancel: cancel,
cc: cc,
t: time.NewTimer(0),
rn: make(chan struct{}, 1),
disableServiceConfig: opts.DisableServiceConfig,
}
if target.Authority == "" {
d.resolver = defaultResolver
} else {
d.resolver, err = customAuthorityResolver(target.Authority)
if err != nil {
return nil, err
}
}
d.wg.Add(1)
go d.watcher()
return d, nil
}
// Scheme returns the naming scheme of this resolver builder, which is "dns".
func (b *dnsBuilder) Scheme() string {
return "dns"
}
type netResolver interface {
LookupHost(ctx context.Context, host string) (addrs []string, err error)
LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*net.SRV, err error)
LookupTXT(ctx context.Context, name string) (txts []string, err error)
}
// ipResolver watches for the name resolution update for an IP address.
type ipResolver struct {
cc resolver.ClientConn
ip []resolver.Address
// rn channel is used by ResolveNow() to force an immediate resolution of the target.
rn chan struct{}
q chan struct{}
}
// ResolveNow resend the address it stores, no resolution is needed.
func (i *ipResolver) ResolveNow(opt resolver.ResolveNowOption) {
select {
case i.rn <- struct{}{}:
default:
}
}
// Close closes the ipResolver.
func (i *ipResolver) Close() {
close(i.q)
}
func (i *ipResolver) watcher() {
for {
select {
case <-i.rn:
i.cc.NewAddress(i.ip)
case <-i.q:
return
}
}
}
// dnsResolver watches for the name resolution update for a non-IP target.
type dnsResolver struct {
freq time.Duration
backoff backoff.Exponential
retryCount int
host string
port string
resolver netResolver
ctx context.Context
cancel context.CancelFunc
cc resolver.ClientConn
// rn channel is used by ResolveNow() to force an immediate resolution of the target.
rn chan struct{}
t *time.Timer
// wg is used to enforce Close() to return after the watcher() goroutine has finished.
// Otherwise, data race will be possible. [Race Example] in dns_resolver_test we
// replace the real lookup functions with mocked ones to facilitate testing.
// If Close() doesn't wait for watcher() goroutine finishes, race detector sometimes
// will warns lookup (READ the lookup function pointers) inside watcher() goroutine
// has data race with replaceNetFunc (WRITE the lookup function pointers).
wg sync.WaitGroup
disableServiceConfig bool
}
// ResolveNow invoke an immediate resolution of the target that this dnsResolver watches.
func (d *dnsResolver) ResolveNow(opt resolver.ResolveNowOption) {
select {
case d.rn <- struct{}{}:
default:
}
}
// Close closes the dnsResolver.
func (d *dnsResolver) Close() {
d.cancel()
d.wg.Wait()
d.t.Stop()
}
func (d *dnsResolver) watcher() {
defer d.wg.Done()
for {
select {
case <-d.ctx.Done():
return
case <-d.t.C:
case <-d.rn:
}
result, sc := d.lookup()
// Next lookup should happen within an interval defined by d.freq. It may be
// more often due to exponential retry on empty address list.
if len(result) == 0 {
d.retryCount++
d.t.Reset(d.backoff.Backoff(d.retryCount))
} else {
d.retryCount = 0
d.t.Reset(d.freq)
}
d.cc.NewServiceConfig(sc)
d.cc.NewAddress(result)
}
}
func (d *dnsResolver) lookupSRV() []resolver.Address {
var newAddrs []resolver.Address
_, srvs, err := d.resolver.LookupSRV(d.ctx, "grpclb", "tcp", d.host)
if err != nil {
grpclog.Infof("grpc: failed dns SRV record lookup due to %v.\n", err)
return nil
}
for _, s := range srvs {
lbAddrs, err := d.resolver.LookupHost(d.ctx, s.Target)
if err != nil {
grpclog.Infof("grpc: failed load balancer address dns lookup due to %v.\n", err)
continue
}
for _, a := range lbAddrs {
a, ok := formatIP(a)
if !ok {
grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
continue
}
addr := a + ":" + strconv.Itoa(int(s.Port))
newAddrs = append(newAddrs, resolver.Address{Addr: addr, Type: resolver.GRPCLB, ServerName: s.Target})
}
}
return newAddrs
}
func (d *dnsResolver) lookupTXT() string {
ss, err := d.resolver.LookupTXT(d.ctx, d.host)
if err != nil {
grpclog.Infof("grpc: failed dns TXT record lookup due to %v.\n", err)
return ""
}
var res string
for _, s := range ss {
res += s
}
// TXT record must have "grpc_config=" attribute in order to be used as service config.
if !strings.HasPrefix(res, txtAttribute) {
grpclog.Warningf("grpc: TXT record %v missing %v attribute", res, txtAttribute)
return ""
}
return strings.TrimPrefix(res, txtAttribute)
}
func (d *dnsResolver) lookupHost() []resolver.Address {
var newAddrs []resolver.Address
addrs, err := d.resolver.LookupHost(d.ctx, d.host)
if err != nil {
grpclog.Warningf("grpc: failed dns A record lookup due to %v.\n", err)
return nil
}
for _, a := range addrs {
a, ok := formatIP(a)
if !ok {
grpclog.Errorf("grpc: failed IP parsing due to %v.\n", err)
continue
}
addr := a + ":" + d.port
newAddrs = append(newAddrs, resolver.Address{Addr: addr})
}
return newAddrs
}
func (d *dnsResolver) lookup() ([]resolver.Address, string) {
newAddrs := d.lookupSRV()
// Support fallback to non-balancer address.
newAddrs = append(newAddrs, d.lookupHost()...)
if d.disableServiceConfig {
return newAddrs, ""
}
sc := d.lookupTXT()
return newAddrs, canaryingSC(sc)
}
// formatIP returns ok = false if addr is not a valid textual representation of an IP address.
// If addr is an IPv4 address, return the addr and ok = true.
// If addr is an IPv6 address, return the addr enclosed in square brackets and ok = true.
func formatIP(addr string) (addrIP string, ok bool) {
ip := net.ParseIP(addr)
if ip == nil {
return "", false
}
if ip.To4() != nil {
return addr, true
}
return "[" + addr + "]", true
}
// parseTarget takes the user input target string and default port, returns formatted host and port info.
// If target doesn't specify a port, set the port to be the defaultPort.
// If target is in IPv6 format and host-name is enclosed in sqarue brackets, brackets
// are strippd when setting the host.
// examples:
// target: "www.google.com" defaultPort: "443" returns host: "www.google.com", port: "443"
// target: "ipv4-host:80" defaultPort: "443" returns host: "ipv4-host", port: "80"
// target: "[ipv6-host]" defaultPort: "443" returns host: "ipv6-host", port: "443"
// target: ":80" defaultPort: "443" returns host: "localhost", port: "80"
func parseTarget(target, defaultPort string) (host, port string, err error) {
if target == "" {
return "", "", errMissingAddr
}
if ip := net.ParseIP(target); ip != nil {
// target is an IPv4 or IPv6(without brackets) address
return target, defaultPort, nil
}
if host, port, err = net.SplitHostPort(target); err == nil {
if port == "" {
// If the port field is empty (target ends with colon), e.g. "[::1]:", this is an error.
return "", "", errEndsWithColon
}
// target has port, i.e ipv4-host:port, [ipv6-host]:port, host-name:port
if host == "" {
// Keep consistent with net.Dial(): If the host is empty, as in ":80", the local system is assumed.
host = "localhost"
}
return host, port, nil
}
if host, port, err = net.SplitHostPort(target + ":" + defaultPort); err == nil {
// target doesn't have port
return host, port, nil
}
return "", "", fmt.Errorf("invalid target address %v, error info: %v", target, err)
}
type rawChoice struct {
ClientLanguage *[]string `json:"clientLanguage,omitempty"`
Percentage *int `json:"percentage,omitempty"`
ClientHostName *[]string `json:"clientHostName,omitempty"`
ServiceConfig *json.RawMessage `json:"serviceConfig,omitempty"`
}
func containsString(a *[]string, b string) bool {
if a == nil {
return true
}
for _, c := range *a {
if c == b {
return true
}
}
return false
}
func chosenByPercentage(a *int) bool {
if a == nil {
return true
}
return grpcrand.Intn(100)+1 <= *a
}
func canaryingSC(js string) string {
if js == "" {
return ""
}
var rcs []rawChoice
err := json.Unmarshal([]byte(js), &rcs)
if err != nil {
grpclog.Warningf("grpc: failed to parse service config json string due to %v.\n", err)
return ""
}
cliHostname, err := os.Hostname()
if err != nil {
grpclog.Warningf("grpc: failed to get client hostname due to %v.\n", err)
return ""
}
var sc string
for _, c := range rcs {
if !containsString(c.ClientLanguage, golang) ||
!chosenByPercentage(c.Percentage) ||
!containsString(c.ClientHostName, cliHostname) ||
c.ServiceConfig == nil {
continue
}
sc = string(*c.ServiceConfig)
break
}
return sc
}